Browse Source

latest additions

master
wiebel 4 years ago
parent
commit
dded78cb83
  1. 20059
      Hardware/kicad/CANNode.kicad_pcb
  2. 5
      src/CANNode.cpp
  3. 4
      src/Node_1_def.h
  4. 4
      src/Node_2_def.h
  5. 51
      src/Node_3_def.h

20059
Hardware/kicad/CANNode.kicad_pcb

File diff suppressed because it is too large

5
src/CANNode.cpp

@ -14,9 +14,9 @@
// For Node definition:
#include "Node_1_def.h" // Dachstuhl
//#include "Node_1_def.h" // Dachstuhl
//#include "Node_2_def.h" // Werkstatt
//#include "Node_3_def.h" // Keller
#include "Node_3_def.h" // Keller
// Metro ticks in ms
#define METRO_CAN_tick 1
@ -305,7 +305,6 @@ void loop(void)
Serial.println();
CAN_send(NOTIFY, 0x0, NEW_TWID, addr, sizeof(addr));
}
}
}
if (METRO_OW_read.check() ) {

4
src/Node_1_def.h

@ -29,7 +29,7 @@
static uint8_t node_id PROGMEM= { NODE_ID };
static OW_switch_t switches[N_SWITCHES] PROGMEM={
// nick, addr[8], event_tag[sw1, sw2]
{ 255, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } },
// { 255, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } },
{ 201, { 0x12, 0x5b, 0x27, 0x50, 0x0, 0x0, 0x0, 0x26 }, { 1, 11, 2, 12 } }, // Flur -> Bad
{ 202, { 0x12, 0xF7, 0x95, 0x4F, 0x0, 0x0, 0x0, 0x69 }, { 9, 9, 7, 7 } }, // Treppe Unten
// { 203, { 0x12, 0x68, 0x31, 0x67, 0x0, 0x0, 0x0, 0xBC }, { 5, 6 } },
@ -40,7 +40,7 @@ static OW_switch_t switches[N_SWITCHES] PROGMEM={
{ 011, { 0x12, 0x9A, 0x94, 0x4F, 0x0, 0x0, 0x0, 0x2D }, { 6, 6, 255, 254 } }, // Bjarne
{ 012, { 0x12, 0x2F, 0x98, 0x4F, 0x0, 0x0, 0x0, 0xE0 }, { 8, 8, 0, 0 } }, // SZ
{ 255, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } },
{ 0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } }
{ 0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } } // END MARK
};
static uint8_t switches_state[N_SWITCHES];
static outputs_t outputs[N_OUTPUTS] PROGMEM={

4
src/Node_2_def.h

@ -29,12 +29,12 @@
static uint8_t node_id PROGMEM= { NODE_ID };
static OW_switch_t switches[N_SWITCHES] PROGMEM={
// nick, addr[8], event_tag[pioA_FALL, pioA_RISE, pioB_FALL, pioB_RISE]
{ 255, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } },
// { 255, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } },
{ 21, { 0x12, 0x86, 0xB4, 0x54, 0x0, 0x0, 0x0, 0x5F }, { 23, 23, 37, 37 } }, // Flur
{ 22, { 0x12, 0xCE, 0x6E, 0xCA, 0x0, 0x0, 0x0, 0x9C }, { 22, 22, 21, 21 } }, // WZ
// { 22, { 0x12, 0xC7, 0x2F, 0xCF, 0x0, 0x0, 0x0, 0xAF }, { 22, 22, 21, 21 } }, // WZ
// { 22, { 0x12, 0x5E, 0xFF, 0x55, 0x0, 0x0, 0x0, 0x2C }, { 21, 21, 22, 22 } }, // WZ
{ 0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } }
{ 0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } } // END MARK
};
static uint8_t switches_state[N_SWITCHES];
static outputs_t outputs[N_OUTPUTS] PROGMEM={

51
src/Node_3_def.h

@ -13,14 +13,14 @@
#define DEBUG 0 // 1 for noisy serial
#define LED 13
#define RELAY1 0
#define RELAY2 1
#define RELAY3 23
#define RELAY4 22
#define RELAY5 17
#define RELAY6 16
#define RELAY7 19
#define RELAY8 18
#define RELAY1 0 // EZ
#define RELAY2 1 // Küche
#define RELAY3 23 // Terrasse
#define RELAY4 22 // RO_Garten
#define RELAY5 17 // RO_Garten
#define RELAY6 16 //
#define RELAY7 19 // EG Flur
#define RELAY8 18 //
// OneWire
#define OW_pin 14
@ -32,23 +32,24 @@ static OW_switch_t switches[N_SWITCHES] PROGMEM={
{ 11, { 0x12, 0xF2, 0x2A, 0x66, 0x0, 0x0, 0x0, 0x41 }, { 1, 1, 0, 0 } }, // EZ -> Flur
{ 12, { 0x12, 0x37, 0x8A, 0x4F, 0x0, 0x0, 0x0, 0xE5 }, { 2, 2, 2, 2 } }, // im keller TEST
{ 13, { 0x12, 0x71, 0x51, 0x57, 0x0, 0x0, 0x0, 0x28 }, { 2, 2, 0, 0 } }, // Küche Kühlschank
{ 14, { 0x12, 0x5e, 0xff, 0x55, 0x0, 0x0, 0x0, 0x2c }, { 2, 2, 3, 3 } }, // Küche Terasse
//{ 21, { 0x12, 0x86, 0xB4, 0x54, 0x0, 0x0, 0x0, 0x5F }, { 3, 3, 4, 4 } },
{ 22, { 0x12, 0x84, 0xAD, 0x4F, 0x0, 0x0, 0x0, 0x12 }, { 1, 1, 2, 2 } }, // EZ -> Küche
// { 31, { 0x12, 0x88, 0xDD, 0x53, 0x0, 0x0, 0x0, 0x28 }, { 210, 211, 220, 221 } }, // Roldenschalter (A - UP, B - DOWN)
{ 31, { 0x12, 0x8F, 0xE2, 0x86 ,0x0, 0x0, 0x0, 0xC6}, { 220, 221, 210, 211 } } // Roldenschalter (A - UP, B - DOWN)
// { 31, { 0x12, 0x88, 0xDD, 0x53, 0x0, 0x0, 0x0, 0x28 }, { 210, 211, 220, 221 } }, // Rolladenschalter (A - UP, B - DOWN)
{ 31, { 0x12, 0x8F, 0xE2, 0x86 ,0x0, 0x0, 0x0, 0xC6}, { 220, 221, 210, 211 } }, // Rolladenschalter (A - UP, B - DOWN)
{ 0, { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }, { 0, 0, 0, 0 } } // END MARK
};
static uint8_t switches_state[N_SWITCHES];
static outputs_t outputs[N_OUTPUTS] PROGMEM={
// type, address(PIN), initial value, inverted
{ GPIO, 0, 0, true }, // 0
{ GPIO, 1, 0, true }, // 1
{ GPIO, 23, 0, true }, // 2
{ GPIO, 22, 0, true }, // 3
{ GPIO, 17, 0, true }, // 4
{ GPIO, 16, 0, true }, // 5
{ GPIO, 19, 0, true }, // 6
{ GPIO, 18, 0, true }, // 7
{ GPIO, RELAY1, 0, true },
{ GPIO, RELAY2, 0, true },
{ GPIO, RELAY3, 0, true },
{ GPIO, RELAY4, 0, true },
{ GPIO, RELAY5, 0, true },
{ GPIO, RELAY6, 0, true },
{ GPIO, RELAY7, 0, true },
{ GPIO, RELAY8, 0, true },
{ NOP, 0xFF, 0, 0 }
};
static uint8_t outputs_state[N_OUTPUTS];
@ -92,13 +93,13 @@ static event_t tx_events[N_EVENTS] PROGMEM={
static action_t action_map[N_ACTIONS] PROGMEM={
// tag, output_idx
{1, 0},
{2, 1},
{3, 2},
{4, 3},
{5, 4},
{1, 0}, // EZ
{2, 1}, // Küche
{3, 2}, // Terrasse
{4, 3}, // RO_Garten
{5, 4}, // RO_Garten
{6, 5},
{7, 6},
{7, 6}, // EG_Flur
{8, 7},
{9, 0},{9, 1},{9, 2},{9, 3},{9, 4},{9, 5},{9, 6},{9, 7},
{210, 210},

Loading…
Cancel
Save